Harman JBL BAR 1300X, Owner'S Manual

Page: 9 / 31

9 9
www.jbl.com
English
4. PLACE
4.1 Desktop placement
Place the soundbar, detachable speakers and subwoofer on a
flat and stable surface. Refer to the recommended distance in
the following diagram.
L
R
> 4 m /
13 ft
3 m / 10
ft
>10
cm
/ 4”
2.5-
3.0
m /
8.2-
9.8
ft
>5c
m/2
”
1-1
.4 m
/ 3-
4.6
ft
1-1
.4 m
/ 3-
4.6
ft
1-6 m/3-20 ft
> 4 m /
13 ft
3 m / 10
ft
>10
cm
/ 4”
2.5-
3.0
m /
8.2-
9.8
ft
>5c
m/2
”
1-1
.4 m
/ 3-
4.6
ft
1-1
.4 m
/ 3-
4.6
ft
1-6 m/3-20 ft
NOTES:
– The power cord shall be properly connected to power.
– Do not place any objects on the top of the soundbar, detachable
speakers or subwoofer.
– Charge the detachable speakers in time to ensure sufficient battery
power (See “ 6.2 Charge the detachable speakers ”).
– Use the supplied side caps to cover the two ends of the soundbar
after you detach the rear surround speakers (See Step 5 under
“
4.2.2 Wall-mount the detachable speakers as rear surround
speakers ”).
4.2 Wall-mounting
Wall-mount the soundbar and detachable rear speakers together
or separately.
4.2.1 Wall-mount the soundbar
1
4
≥30 mm/1.18"
721.7 mm / 28.41”
1a)
1b)
> 50 mm/2’’
≤8
mm/
0.31
"
4mm/
0.16
"
1c)
2
3
1. Preparation:
a) With the distance of about 2” (50mm) from your TV, stick
the supplied wall-mounting template to a wall by using
adhesive tapes.
b) Use your ballpen tip to mark the screw holder location.
Remove the template.
c) On the marked location, drill a 4 mm/0.16” hole.
2. Install the support for wall-mounting bracket.
3. With the screw, fasten the L-shaped wall-mounting bracket
onto the bottom of the soundbar.
4. Mount the soundbar.
5. After the soundbar is securely wall-mounted, dock the two
detachable speakers onto the soundbar.
NOTES:
– Make sure that the wall can support the weight of the soundbar.
– Install on a vertical wall only.
– Avoid a location under high temperature or humidity.
– Before wall-mounting, make sure that cables can be properly
connected between the soundbar and external devices.
– Before wall-mounting, make sure that the soundbar is unplugged
from power. Otherwise, it may cause an electric shock.
– To move the soundbar, first remove the two detachable speakers to
avoid accidental damage.
– Use the supplied side caps to cover the two ends of the soundbar
after you detach the rear surround speakers (See Step 5 under
“
4.2.2 Wall-mount the detachable speakers as rear surround
speakers ”).