Harman JBL BAR 1300, Owner'S Manual

Page: 17 / 57

17 17
www.jbl.com
English
1. Check that the soundbar and the detachable rear speakers
are connected wirelessly (See “ 6.1 Connect the detachable
rear speakers and subwoofer ”).
2. On the remote control, press to toggle between
surround sound levels.
J
“ MID ” / “ HIGH ” / “ MUTE ” / “ LOW ” is displayed
(Default: “ MID ”).
J “ UNDOCK REAR SPKR ” is displayed if the detachable
rear speakers have been docked onto the soundbar.
UNDOCK REAR SPKR
6.3.4 Bass adjustment
You can make bass adjustment as needed.
LVL 3
LVL 4
LVL 5 LVL 1
LVL 2
LVL 3
LVL 4
LVL 5 LVL 1
LVL 2
• On the remote control, press to toggle between bass
levels.
J “LVL1” to “LVL5” is displayed (Default: “LVL3” ).
6.4 Use the detachable speakers as standalone
Bluetooth speakers
For music playback, you can set up the detachable rear speakers
as standalone Bluetooth speakers or a Bluetooth stereo system.
6.4.1 Standalone Bluetooth speakers
Either of the detachable rear speakers can be a standalone
Bluetooth speaker.
Settings
Bluetooth
Bluetooth
DEVICES
BAR 1300 REAR SPK
Now Discoverable
Connected
< 10 m / 33 ft
L / R
Connect a Bluetooth device
1. On the left or right speaker, press to switch to the
Bluetooth mode.
J
: Ready for Bluetooth pairing
J The detachable rear speaker disconnects from the
soundbar.
2. On your Bluetooth device, enable Bluetooth and search for
“BAR 1300 REAR SPK” within three minutes.
J
: Successful connection
L / R
3. Start audio play on your Bluetooth device.
To reconnect the last paired device
Your Bluetooth device is retained as a paired device when the
speaker goes to standby mode. Next time you switch to the
Bluetooth mode, the speaker reconnects the last paired device
automatically.
To connect to another Bluetooth device
1. In the Bluetooth mode, press on the left or right speaker.
J
: The speaker enters the Bluetooth pairing mode.
2. Follow the Step 2 under “ Connect a Bluetooth device ”.