Appendix D - Upgrade Processes
82
Vision
2
Instruction Manual
3.
Scroll down to the Recycling section (FIG. 114).
4.
Click on "Disable Overlapped Recycle" setting.
5.
From the drop down change from False to True.
6.
Click OK and close the dialog.
Change Start Up Type
Due to the booting sequence of services, the Vision2 Network Monitor service Startup Type needs to be delayed until the NICs
become available. If this is not done, the wrong NIC will be used which means the data recorded on network usage will be wrong.
1.
On the desktop click Start > Run.
2.
On the open field type services.msc and then click OK. Select the AMX Vision2 Network Monitor Service (FIG. 115).
FIG. 114
V2AppPool Advanced Settings
FIG. 115
AMX Vision2 Network Monitor Service Menu
