9
There are two methods for recording loops to a JamSync slaved JamMan device, they are:
• Manual Slave Recording Method
Using this method, you can record to the master then wait until you’re ready to
record to the slave� This method works well if you do not wish to immediately record
to the slave and instead wish to record to the slave at a later time in the song� When
using this method, at the point you are ready to record to the slave, you must arm
the slave for recording before the master device reaches its loop start point� When
the master reaches its loop start point it will send the record command to the
slave device(s), so the slave device must be armed in advance to receive the record
command�
• Sequential Slave Recording Method
Using this method, you can record to a JamSync slave immediately upon setting the
loop end point of the master� Use this method when you want to immediately begin
recording to the slave device after recording to the master device�
To record using the Manual Slave Recording Method:
1� Press the
FOOTSWITCH
on the master device and begin singing� The
REC LED
will light
solid red and recording will begin�
2� When finished recording to the master, press the
FOOTSWITCH
once to set the loop
end point� The phrase will automatically begin playing back in a repeating loop and the
PLAY LED
will light solid green�
3� Press the
FOOTSWITCH
on the slave device to arm the slave for recording� The
REC
LED
on the slave device will begin flashing red� Once the master device reaches its loop
start point, recording on the slave will begin (the
REC LED
will now light solid red on
the slave device)� Once recording has begun, you can begin singing�
4� When finished recording to the slave, press the slave’s
FOOTSWITCH
once to set the
loop end point� The phrase will automatically begin playing back along with the master
loop and the
PLAY LED
will light solid green�
5� Press the
FOOTSWITCH
on the master device 2 times quickly to stop loop playback on
both devices�
To record using the Sequential Slave Recording Method:
1� Press the
FOOTSWITCH
on the slave device� The
REC LED
will flash red, indicating the
slave is armed for recording�
2� Press the
FOOTSWITCH
on the master device and begin singing� The
REC LED
will light
