background image

Record Service

68

Vision

Instruction Manual

Record a video as follows:
1.

Enter a name for the recording in the Name text box.

2.

Select a category (folder) to record to.

3.

Click 

Start

. Once a Manual Record is started, you cannot leave this screen until stopping the Record. If performing more than 

one Manual Record at a time, login with a separate Browser tab.

NOTE: 

You cannot record longer than 180 minutes.

4.

Click 

Stop 

to end the recording and save a copy of the recording to the archive.

Scheduled Recording

The Scheduled Record feature enables scheduling when to record a MPEG 2 Live Channel. Configure the Record Service in the same 

way as for a Continuous Record, except choose Scheduled Record from the Recording Type drop down. After configuring the 

Record service for scheduled recording and enabling the service, a Schedule section appears at the bottom of the screen. Click 

Edit 

to enter the Schedule Screen. Alternatively, go to 

Video Recorders > Scheduled Recording

 and select and load the Scheduled 

Record Service to use.

Edit the Record Schedule as follows:
1.

In the Schedule editor click the calendar icon and select the date when the recording should occur. (FIG. 95).

NOTE: 

A red horizontal line shows the current time. Click Show Now to jump to the current time.

2.

Move the cursor over the schedule to select the time (24 hour clock) where the recording should occur and click at this 

selection. Up/down cursor keys may be used. A pop-up dialog box appears (FIG. 96).

Manual Record Options

Name

Name for the video to record in the archive.

Select Category

Select category to record to. Vision

2

 will prevent selecting a category which contains other 

categories. An empty category or one which contains media files must be selected.

Start

Start Recording.

Stop

Stop Recording. 

Note:

 Recordings which are shorter than 1 minute are discarded.

FIG. 95  

Schedule Editor for Record Service

FIG. 96  

Scheduled Recording Dialog Box

Summary of Contents for AMX Vision V2-MASTER-0300

















































































Reviews: