Chapter 2: Installing and Configuring the Windowing Processor
13
N1512 Windowing Processor User Manual
Logging in to the Windowing Processor’s Web Interface
Now that you have discovered your units in N-Able, follow these directions to access an individual unit’s web interface. This
interface provides a complete set of configuration options for the unit.
1.
Double-click the N1512’s name (on either the
Video Matrix
or
Unit
Management
tab) to view its configuration pages.
FIG. 4
SELECTING WINDOWING PROCESSOR IN N-ABLE
NOTE:
If prompted, enter admin and password for the default username and password. Once logged in, you can change the password
(using the options on the Unit Settings page). The Login page is only displayed if N-Able's stored username/password does not match
the unit's username/password. A default system will match.
NOTE:
If you would like for N-Able to support auto-login to your units, make sure N-Able’s Device Auto-login settings match the unit’s
username and password (by selecting N-Able > Settings from the N-Able tool bar).
2.
The
Arrangement
page is displayed (see
).
FIG. 5
ARRANGEMENT PAGE
NOTE:
Screen-by-screen descriptions of the web interface options are provided for your reference in
Chapter 3: Windowing Processor
Configuration Options on page 16
From any main page in the web interface, you can
access all other main pages by clicking the links in
the top navigation bar.