Overview
9
Hardware Reference Guide - NX-Series NetLinx Integrated Controllers
Copy and Clone Configuration
On any X-Series controller, configuration information can be exported to and imported from a USB storage device. There are two
different levels of configuration export: “COPY” and “CLONE”. See the
NX Series NetLinx Integrated Controllers WebConsole &
Programming Guide
for information on using the EXPORT CONFIG and EXPORT CLONE telnet commands.
Difference in DEFINE_PROGRAM Program Execution
Due to differences in the underlying architecture of the X-Series masters, changing variables in the DEFINE_PROGRAM section of
code can negatively impact program performance.
External SD Card Slot (NX-3200 and NX-4200 only)
The external SD card slot in the NX-3200 and NX-4200 is for future use. Until firmware is available that supports the use of an
external SD card, it is recommended that the card slot be left empty.
Redundant Power Source (NX-4200 only)
The NX-4200 can be powered either with a connection to the main AC power (110/220VAC) or from an external 12V DC power
supply.
Power Button (NX-4200 only)
The NX-4200 includes a momentary button on the front panel that can be used to turn on and off the unit.
Front Panel LCD Status Display (NX-4200 only)
The NX-4200 includes a 2-line by 20-character display on the front panel to display status information. The toggle switch next the
display scrolls through a fixed list of information about the unit and its current configuration.
4-Port PoE ICSLAN Switch (NX-4200 only)
The NX-4200 includes four ICSLAN connection ports via a built-in 4-port switch. When powered by an AC source, the NX-4200 can
supply power via PoE to each port on the 4-port switch.
