
Encoder Configuration Options
N2615-WP/N2625-WP Manual
26
General Setup Section
The
General Setup
section of the
Home
. Options are described in
FIG. 22
General Setup Section
TABLE 4
Home Page: General Setup Section
Option
Description
Notes
Enable Send Status
Enables the encoder to send a periodic status packet to
the
Send Status Address
listed.
Send Status Address
When
Enable Send Status
is enabled, the encoder
sends a periodic status packet to the IP address
specified here.
Status Interval (sec)
Determines how often (in seconds) the unit transmits
status packets.
Gratuitous ARP
Enables the encoder to send a periodic address
resolution protocol (ARP) packet to the network.
Arp Interval (sec)
Determines how often (in seconds) the unit transmits
gratuitous ARP packets.
Discovery Packet
Transmit
Enables the N-Series multicast discovery service (used
to identify units)
For N-Series devices to communicate with each other,
their multicast settings must be compatible.
Discovery Interval (sec)
Determines how often (in seconds) the unit transmits
discovery packets.
DSCP #
Select the Differentiated Services Code Point (DSCP) for
the transmitting vlan traffic.