Harman AMX N2300 SERIES, Instruction Manual

Page: 37 / 66

Encoder Configuration Options
37
N2312/N2322 User Manual
LLDP Page
Click the More link at the top of any of the main web pages and select LLDP to access the page shown in Figure 32 . The LLDP page
displays information from the Link Layer Discover Protocol (LLDP) packet which identifies the port number and switch the device is
connected to.
FIG. 32
LLDP Page
NetLinx Page
Click the More link at the top of any of the main web pages and select NetLinx to access the page shown in Figure 33 . Options are
described in Table 12 . This page allows you to prepare your N2312 Encoder for NetLinx-driven configuration. This is explained in
more detail in Appendix A: NetLinx Control on page 29.
NOTE: NetLinx takes over the Serial port when active.
FIG. 33
NetLinx Page
TABLE 12
NetLinx Page Options
Command Description
Enable Click to enable/disable NetLinx on this device.
Device Status This status field will show the device to be Online , Connected , Offline , or Unknown .
Master Mode Select Auto , Listen , or URL .
IP/URL Enter the address of the Master Controller.