Live MPEG MAX CSE Encoder Service
42
Vision
2
Instruction Manual
6.
Use the
Video Mode
options menu to set the video mode of the multicast stream. It is recommended that you select CBR.
7.
Use the
Audio Bitrate
options menu to set the audio bitrate of the multicast stream.
8.
Use the
Audio Sample Rate
options menu to indicate the audio sample rate of the multicast stream.
9.
Click
Apply
to save the configuration changes.
10. Change the Service Enable from No to Yes and click
Apply
to begin the multicast stream. This will also add a new live channel
to the list of Live Channels available to PC and set-top box users which takes its name from the Encoder’s Service Name.
NOTE:
With the stream enabled, you cannot change any of the multicast or encoding parameters.
Viewing the Stream
Click the
Watch
button, which appears after enabling the stream, to
view the encoder output. The Encoder Live Channel takes its
name from the Service Name text box in the Max Encoder configuration page. Change the Service Name to change the channel
name.
NOTE:
If you configure a firewall on Vision2 servers, then incoming multicasts must be permitted.