10
Front Panel Controls and Indicators
The following sub-sections describe each component on the front panel of the DVX. Refer to FIG. 1 for the
component layout of the front panel.
LEDs
The LEDs on the front panel indicate the communications status of several different connections.
as
described in the table below:
SERIAL LEDs
IR/SERIAL LEDs
LINK/ ACT LED
STATUS LED
INPUT LED
ICSLAN LED
OUTPUT LED
RELAY LEDs
I/O LEDs
Front Panel LEDs
Label
Color
Description
LINK/ACT
Green
On indicates that the Ethernet cables are connected and terminated
correctly;
Blinking indicates receiving Ethernet data packets.
STATUS
Green
Blinking indicates that the system is programmed and communicating
properly
INPUT
Yellow
Blinking indicates that the Controller is receiving data.
OUTPUT
Red
Blinking indicates that the Controller is transmitting data.
ICSLAN
Red
Blinking when the category cable to port 1 is connected and terminated
correctly.
SERIAL
Red/Yellow Two LEDs indicate that the RS-232 port (1-2) is transmitting or receiving
data.
RELAY
Red
On indicates that relay channels are active on Port (21).
IR/SERIAL
Red
On indicates that IR/SERIAL channels are transmitting control data on Port
(11-12).
I/O
Yellow
On indicates that I/O channels are active on Port (22).
