C
2000
17
Specifications
Type:
condenser pressure gradient microphone
Polar patterns:
cardioid
Sensitivity at 1000 Hz:
20 mV/Pa
Z
-34 dBV
Frequency range:
30 to 20,000 Hz (refer to frequency response curve)
Electrical impedance:
200 ohms
Recommended load impedance:
1000 ohms
Bass cut filter slope:
6 dB/octave below 500 Hz
Preattenuation pad:
-10 dB, switchable
Equivalent noise level to IEC 60268-4:
30 dB
Equivalent noise level to IEC 60268-4 (A-weighted): 20 dB-A
Signal/noise ratio re 1 Pa (A-weighted):
74 dB*)
Max. SPL for 0.5% THD (0/-10 dB):
200 / 630 Pa
Z
140 / 150 dB SPL*)
Dynamic range:
120 dB (A-weighted)*)
Environment: - temperature:
-
relative
humidity:
-10°C to +60°C - (14°F to 140°F)
90% (+20°C/68°F), 85% (+60°C/140°F)
Power requirement:
9 to 52 V phantom power to IEC 61938
Current consumption:
2 mA
Connector pinout:
3-pin male XLR to IEC standard
Size:
max. dia.: 53 mm (2.1 in.), length: 159 mm (6.3 in.)
Net weight:
325 g (11.5 oz.)
*) Values for 48 V phantom power; reduce by 3 dB for 24 V and 6 dB for 12 V phantom power.
This product conforms to the standards listed in the related Declaration of Conformity. To order a free copy of
the Declaration of Conformity for this product, visit http://www.akg.com or contact [email protected].
Frequency Response Curve
Polar Pattern
7
Specifications
20120330_BDA C2000 (5018376)_PRINT.pdf Release 1.0
