17
1-90-09730R31_05/14
#5 Installing into an existing fireplace chimney
This method provides excellent venting for normal operation.
This method also provides natural draft in the event of a
power failure.
In Canada and some places in the US it is required that the
vent pipe extend all the way to the top of the chimney.
In this method a cap should also be installed on the chimney
to keep out rain. Be sure to use approved pellet vent pipe
fittings. Seal pipe joints with silicone in addition to the sealing
system used by the manufacturer. Pipe size should be
increased to 4" using this method.
ThE ChImNEY muST bE OF A TYPE SuITAblE FOr
SOlId-FuEl burNINg.
#6 Installing into an existing chimney
This method provides excellent venting for normal operation.
This method also provides natural draft in the event of a
power failure.
In Canada and some places in the US it is required that the
vent pipe extend all the way to the top of the chimney. The
pipe or liner inside the chimney should be 4" diameter.
In this method a cap should also be installed on the chimney
to keep out rain.
Fig. 24
Fig. 25
venting
WARNING
!
ThE ChImNEY ANd CONNECTOr muST bE
mAINTAINEd IN gOOd CONdITION ANd KEPT ClEAN.
Summary of Contents for Advance Freestanding Pellet Stove
Page 2: ......
