background image

Harman®  •  Absolute43 Owner’s Manual_R2  •  2015 -___  •  03/15

7

3-90-777000c

NOTICE

Hearth & Home Technologies is not responsible for stove 

performance or extra maintenance required as a result of 

using fuel with higher ash or mineral content.

Shelled Field Corn

•  Must be 15% moisture content or less

•  Must be clean and free of debris

•  Must be mixed with wood pellets. (Up to 50%)

•  Stalk  parts,  excessive  fines  and  cob  remnants  may 

cause feed system jams or blockage

When changing from wood pellets to a corn/pellet mixture, 

the  feed  limit  will  likely  need  adjusted  to  a  lower  setting. 

When  under  maximum  demand,  ensure  there  is  no 

unburned fuel being pushed into the ash pan.

Storage

• 

Wood pellets should be left in their original sealed bag 

until ready to use, to prevent moisture.

•  Shelled corn should be stored in a tightly sealed container 

to prevent moisture and to deter pests

•  Do not store fuel within the specified clearance areas, or 

in a location that will interfere with routine cleaning and 

maintenance procedures.

CAUTION

!

Tested and approved for use with wood pellets and a 

mixture  of  shelled  field  corn  and  wood  pellets  ONLY. 

Burning of any other fuel will void your warranty.

WARNING

!

Risk of Chemical Poisoning!

Do 

NOT

 burn treated seed corn

• 

Chemical pesticides are harmful or fatal if swallowed

• 

Burning treated seed corn will void the product 

warranty.

CAUTION

!

Do not burn fuel that contains an additive.

•  May cause hopper fire

•  Damage to product may result

Read the list of ingredients on the packaging. If you are 

buying  field  corn,  the  only  ingredient  listed  should  be 

field corn.

WARNING

!

Tested  and  approved  for  use  with  wood  pellets  and  a 

mixture  of  shelled  field  corn  and  wood  pellets  ONLY. 

Burning of any other fuel will void your warranty.

G. Fuel Specifications 

(Cont.)

Summary of Contents for Absolute 43























Reviews: