Harman Stove Company PP38+ Installation & Operating Manual Download Page 22

P38+  Pellet  Stove

HARMAN GOLD  WARRANTY
6   YEAR  TRANSFERABLE  LIMITED
WARRANTY  (Resi denti al)

1 YEAR LIMITED WARRANTY (Commercial)

Harman Stove  Company warrants  its products to  be free from  defects in  material or workmanship,  in normal  use and

service, for  a period  of 6  years from  the date  of sales  invoice and  for mechanical  and electrical  failures, in  normal use  and
service, for a period of 3 years from the date of sales invoice.

If defective in material or workmanship, during the warranty period,  Harman Stove Company will, at its option, repair or

replace the product  as described below.

The warranty above constitutes the entire warranty with respect to Harman Stove Company products.  HARMAN STOVE

COMPANY    MAKES    NO    OTHER    WARRANTY,    EXPRESSED    OR    IMPLI ED,    INCLUDING    “ANY”    WARRANTY    OF

MERCHANTABILITY,  OR   WARRANTY  OF  FITNESS   FOR  A   PARTICULAR  PURPOSE.  No employee,  agent, dealer, or
other person is authorized to give any warranty on behalf of Harman Stove Company.  This warranty does not apply if the product

has been altered in any way after leaving the factory.  Harman Stove Company and its agents assume no liability for “resultant

damages of any kind” arising from the use of its products.  In addition, the manufacturer and its warranty administrator shall be

held free and harmless from liability from damage to property related to the operation, proper or improper, of the equipment.

THERE   ARE  NO   WARRANTIES  WHICH   EXTEND  BEYOND   THE   DESCRIPTION  ON   THE  FACE   HEREOF.

THESE   WARRANTIES  APPLY only  if the device is  installed and operated  as recommended in the  user’s manual.

THESE   WARRANTIES WILL   NOT  APPLY  if abuse,  accident, improper installation,  negligence, or use  beyond rated

capacity  causes  damage.

HOW  TO MAKE A CLAIM  - Any claim under this warranty should be made to the  dealer from whom this appliance was

purchased.  Then contact is made with manufacturer, giving the model and serial numbers, the date of purchase, your dealer’s

name and address, plus a simple explanation of the nature of the  defect.  Extra costs such as mileage and overtime are not
covered.  Nuisance calls are not covered by these warranties.

THIS   WARRANTY    IS   LIMITED    TO   DEFECTIVE    PARTS - REPAIR    AND/OR   REPLACEMENT    AT   HARMAN

STOVE  COMPANY’S   OPTION   AND   EXCLUDES   ANY  INCIDENTAL   AND   CONSEQUENTIAL   DAMAGES   CONNECTED

THEREWI TH.

WARRANTY EXCLUSIONS: Failure due, but not limited to, fire, lightning, acts of God, power failures and/or surges, rust,

corrosion and venting problems are  not covered.  Damage and/or repairs including but not  limited to; remote controls, filters,
fuses,  knobs, glass,  ceramic brick  panels,  ceramic fiber  afterburners, door  packing, tile,  ceramic  log sets,  paint, batteries  or
battery back-up and related duct work are not covered. Also excluded from this warranty are consumable or normal wear items
including but not limited to; flame guides, grates, coal bars, afterburner hoods, fire brick, gaskets. Additional exclusions for corn
stoves are burnpot housing weldment, burnpot grate weldment (pellet or corn), burnpot front plate (pellet or corn), burnpot front
plate lock, corn auger extension,  ceramic insert, and ceramic insert plate. Additional or unusual utility  bills incurred due to any
malfunction or defect  in equipment and the labor cost  of gaining access to or  removal of a unit that requires  special tools or

equipment  are not  covered.   Maintenance  needed to  keep  the stove  in  “good operating  condition” is  not  covered.   This

includes, but is not limited to, cleaning, adjustment of customer controls and customer education.  Labor, materials, expenses
and/or equipment needed to comply with law and/or regulations set forth by any governmental agencies are not covered.

This Warranty provides specific legal rights and the consumer may have other rights that vary from state to state.
In the event  of change in ownership,  the remaining portion of  this warranty may be  transferred to the new  owner by

sending the new owner information and a transfer fee of $25.00 US to the Harman Stove Company.

PLEASE  READ  THE  LITERATURE  BY  THE  MANUFACTURER  FOR  THE  VARIOUS  ACCESSORY  DEVICES.   THE

MANUFACTU RER    WARRANTS    THESE    ACCESSORY    DEVICES,    NOT    HARMAN     STOVE    COMPANY    OR    THEIR
WARRANTY  ADMINISTRATOR.   FURTHERMORE,   THESE  ACCESSORY  DEVICES  MUST  BE   INSTALLED  AND  USED
ACCORDING   TO    THE   RECOMMENDATIONS    OF   THE    MANUFACTURER.

REMEDIES - The remedies set forth herein are exclusive and the  liability of seller with respect to any contract or sale or

anything done in connection therewith, whether in Contract, in tort, under any warranty, or otherwise, shall not, except as herein
expressly provided, exceed the  price of the equipment or part of which  such liability is based.

CLARIFY -  The above  represents the  complete warranty,  which is  given in  connection with  stoves, manufactured  by

Harman  Stove  Company.    No other  commitments,  verbal  or  otherwise,  shall  apply  except  by a  written  addendum  to  this
warranty.

Warranty

Summary of Contents for PP38+























Reviews: