Harman Kardon Onyx Studio
Assembly procedure
絲孔；使用螺絲起子，依次鎖付
3PCs
螺絲
(3*10.2MM)
Place the battery cover shown as in the figure,
and tightens 3 screws by using the T10
screwdriver.
疊一下；分別把
USB/DC
接口排線
,
電池排線
/Key Pad
線插在主板對應位置
Arrange the cables of DC Jack and USB PCB on
the back cover, and then connect
USB/DC/battery/Key pad cables shown in the
figure.
21.
確認排線插入到位后，將後蓋從治具中拿
出，蓋到前蓋上，要求後蓋的把手對準前蓋開
關接口后，盒蓋卡緊
Take the back cover and assemble to the front
cover, make sure the cover has been completely
closed.
22.
取螺絲起子，鎖付螺絲
5PCs(3*14.2MM)
Tightens 5 screws by using the T10 screwdriver.
23.
取
Screw_BB_3*18.2
分別將左、右支架鎖
緊
24.
將前殼保護殼支架組裝到位
注意：
要保護殼支架對準音響上的缺口
把手
按鍵板線接口
1
3
2
5
4
左支架
右支架
