13
ENGLISH
Troubleshooting
TRoUblEsHooTING
If there is no sound from any of the speakers:
Check that receiver/amplifier is on and a source is playing.
•
Check that the powered subwoofer is plugged in, its
•
Power switch
8
is switched on to the “oN
2
” position.
Check all wires and connections between receiver/amplifier and speakers. Make sure all wires are connected.
•
Make sure none of the speaker wires are frayed, cut or punctured.
Review proper operation of your receiver/amplifier.
•
If there is no sound coming from one speaker:
Check the “balance” control on your receiver/amplifier.
•
Check all wires and con nections between receiver/ amplifier and speakers. Make sure all wires are connected.
•
Make sure none of the speaker wires are frayed, cut or punctured.
In Dolby Digital or DTs® modes, make sure that the receiver/processor is configured so that the speaker in
•
question is enabled.
If the system plays at low volumes but shuts off as
volume is increased:
Check all wires and con nec ti ons between receiver/amplifier and speakers.
•
Make sure all wires are connected.
Make sure none of the speaker wires are frayed, cut or punctured.
If more than one pair of main speakers is being used, check the minimum impedance requirements of your
•
receiver/amplifier.
If there is low (or no) bass output:
Make sure the connections to the left and right “speaker Inputs” have the correct polarity (+ and –).
•
Make sure the subwoofer is plugged into an active electrical outlet.
•
Make sure the powered subwoofer is plugged in and switched on.
•
In Dolby Digital or DTs® modes, make sure your receiver/processor is configured so that the subwoofer and lfE
•
output are enabled.
Instructions forusers on removal and disposal of used batteries.
Specification of included battery types.
These symbols shown on the product, the packaging or in the manual or separate
information sheet mean that the product itself, as well as the batteries included or built into the product, should
never be thrown away with general household waste. Take them to applicable collection points, where proper
treatment, recycling and recovery takes place, in accordance with national or local legislation, or European
Directives 2002/96/EC and 2006/66/EC.
Correct handling of the product and batteries to be disposed helps saving resources and prevents possible negative
effects on the environment or human health.
The batteries included with your equipment may be Alkaline, Carbon Zink/Manganese or lithium (button cells)
type. All types should be disposed of according to the above instructions.
To remove the batteries from your equipment or remote control, reverse the procedure described for inserting
batteries in the owners Manual.
for products with a built-in battery that lasts for the lifetime of the product, removal may not be possible for
the user. In this case, recycling or recovery centers handle the dismantling of the product and the removal of the
battery. If, for any reason, it becomes necessary to replace such a battery, this procedure must be performed by
authorized service centers.
00XXCSK - HK HKTS3 OM, ENGv3,DEUv2,FRAv1,NLDv1,ITAv1,SWEv2.indd 13
23/02/09 10:00:08
