background image

TROUBLESHOOTING GUIDE  17

TROUBLESHOOTING GUIDE

This unit is designed for trouble-free operation. Most problems users encounter are due to operating errors. So, if you have a problem, first check this list for a possible solution.
If the problem persists, consult your authorized Harman Kardon service center.

If the problem is . . .

Make sure that the . . .

No lights appear when POWER button is pressed

Unit is plugged into a live outlet

No sound is heard

Unit has not been muted

Correct input function selector button has been pressed

Volume is turned up

Speakers have been turned on using the Speaker Selectors

Headphones are not in use

Jumper pins are in place, unless an external amplifier is in use

No output from one or more channels

Cables are not defective: check/replace speaker cables

Tuner sound has a large amount of interference, or

Antenna is properly connected

The “Stereo” display is not illuminated, or

Antenna is properly located

Tuner sound distorts and/or volume level is too low

Antenna is set in the proper direction

Antenna is adequate to receive the desired station

Tuner is intermittent or continuously buzzing or hissing

Unit is away from fluorescent lights, TVs, motors and 
other electrical appliances

Remote does not function correctly 

Batteries are not weak, and replace them if necessary

Room lighting is not overly bright

Cassette or CD sounds distorted 

Cassette deck or CD player has not been plugged into the 

Phono Input 

(only use the outputs of a turntable or tone arm with the 

Phono Input 

)  

Turntable sounds distorted

Turntable has been plugged into the 

Phono Input 

,

as the other inputs are not compatable with turntable signal levels

No video image

Video source unit’s video ouput is properly connected, the source is turned on and the correct video
input on the HK 3480 has been selected

Video Monitor Output 

·

is connected to a TV or video display, and that the TV is turned on and the 

proper input on the TV has been selected

Summary of Contents for HK 3480





















Reviews: