background image

2

Safety Information

CAUTION:

The FL8550 uses a Laser

System. To prevent direct exposure to 
the laser beam, do not open the cabinet
enclosure or defeat any of the safety
mechanisms provided for your protec-
tion. DO NOT STARE INTO THE LASER
BEAM. To ensure proper use of this pro-
duct, please read this Owner’s Manual
carefully and retain it for future use.
Should the unit require maintenance or
repair, please contact your local Harman
Kardon Service Station. Refer servicing to
qualified personnel only.

Installation Location

To assure proper operation, and to
avoid the potential for safety hazards,
place the unit on a firm and level sur-
face. When placing the unit on a shelf,
be certain that the shelf and any
mounting hardware can support the
weight of the product.

Make certain that proper space is pro-
vided both above and below the unit
for ventilation. If this product will be
installed in a cabinet or other enclosed
area, make certain that there is suffi-
cient air movement within the cabinet. 

Do not place the unit directly on a
carpeted surface. 

Avoid installation in extremely hot or
cold locations, or an area that is
exposed to direct sunlight or heating
equipment.

Avoid moist or humid locations.

Important Safety Information

Verify Line Voltage Before Use

Your FL8550 has been designed for use
with 120-volt AC current. Connection to
a line voltage other than that for which it
is intended can create a safety and fire
hazard, and may damage the unit.

If you have any questions about the 
voltage requirements for your specific
model, or about the line voltage in your
area, contact your selling dealer before
plugging the unit into a wall outlet.

Do Not Use Extension Cords

We do not recommend that extension
cords be used with this product. As with
all electrical devices, do not run power
cords under rugs or carpets or place
heavy objects on them. Damaged power
cords should be replaced immediately by
an authorized service depot with cords
meeting factory specifications.

Handle the AC Power Cord Gently

When disconnecting the power cord from
an AC outlet, always pull the plug; never
pull the cord. If you do not intend to use
the unit for any considerable length of
time, disconnect the plug from the AC
outlet.

Do Not Open the Cabinet

There are no user-serviceable components
inside this product. Opening the cabinet
may present a shock hazard, and any
modification to the product will void your
guarantee. If water or any metal object
such as a paper clip, wire or staple acci-
dentally falls inside the unit, disconnect it
from the AC power source immediately,
and consult an authorized service station.

CAUTION:

 

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE 

COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER 

SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING:

 

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, 

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION:

 

TO PREVENT ELECTRIC SHOCK, MATCH WIDE 

BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION:

 

POUR EVITER LES CHOCS ELECTRIQUES, INRODUIRE LA 

LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE 

LA PRISE ET POUSSER JUSQU'AU FOND.

The lightning flash with arrowhead 
symbol, within an equilateral triangle, is 
intended to alert the user to the 

presence of uninsulated “dangerous voltage” 
within the product’s enclosure that may be of 
sufficient magnitude to constitute a risk of 
electric shock to persons.

The exclamation point within an 
equilateral triangle is intended to 
alert the user to the presence of 

important operating and maintenance 
(servicing) instructions in the literature 
accompanying the appliance.

C A U T I O N

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Summary of Contents for FL 8550





















Reviews: