FRONT PANEL CONTROLS
9
ENGLISH
A
Navigation and Enter Buttons:
Use
these buttons to navigate the on-screen menus,
and press the Enter Button to select an item.
B
Front-Panel Door:
Open this door to
access the two Card Slots and the front-panel
USB Port. To open it, gently press on the triangle
in the center of the door until it unlatches; the
door will drop down. To close the door, remove
all media, then press the door closed at the
same center location until you hear the latch
click. To avoid damaging the door, do not open
or close it by grabbing the edges.
C
Card Slot 1:
Insert an SD, MMC or Memory
Stick memory card into this slot by gently
pushing it all the way in until it clicks. The slot
also accommodates miniSD, microSD and
Memory Stick Duo cards when used with the
appropriate adapter, available in most
electronics and computer stores. Remove a card
from this slot by gently pushing it in until it
unlatches, then pulling it all the way out of the
slot.
D
Card Slot 2:
Insert a Compact Flash I
memory card into this slot by gently pushing it
all the way in until it is firmly seated in the slot.
Remove it by pulling it all the way out of the
slot.
E
USB Port:
Insert a USB client device’s
connector into this port, being careful to
correctly align the device’s plastic tongue with
the gap. Do not connect a computer to this port.
F
Remote IR Sensor:
This sensor receives
infrared commands from the remote control.
Make sure that it is not blocked, although an
optional IR sensor such as the Harman Kardon
HE 1000 may be connected to serve as an exter-
nal sensor when the unit is located in a different
room, installed behind cabinet doors or when
the sensor is otherwise blocked. For best results,
always point your remote control at the DMC
1000’s front panel.
Front Panel Controls
2083124_HK_DMC_1000_OM_ENG.qxp:34241_DMC250_ENG 15/08/08 10:49 Side 9