VCR (Video 1)
TV or Video Monitor
In/Rec
Out/Play
L R VIDEO
Video S-Video Component Video
Y Pb Pr
Component Video
Y Pb Pr
Cable or Sat or HDTV Set-Top Box (Video 2)
OUT
L R Video S-Video
Optical Coax
AUDIO RECORDER
REC/IN
PLAY/OUT
IN
SOURCE COMPONENT CONNECTIONS
Device Connection Options
:
Recommended connections are shown in red, but connections may be made to best fit your system requirements. The Video 4 inputs are on the front panel of the receiver.
Device
Input Name
Audio Input Connections
Audio Output Connections
Video Connections
CD Player
CD
CD
L/R Inputs,
Optical Digital 1
or 2, or Coaxial Digital 1 or 2
Not required
Not required
VCR Video
1
Video 1 L/R Inputs
Video 1 L/R Outputs
Video 1
Composite or S-Video
Input and Output
Cable Box or Satellite Receiver
Video 2
or 3
Video 2
or 3
L/R Inputs,
Optical Digital 1 or 2, or Coaxial Digital 1 or 2 Inputs*
Not required
Video 2
or 3 Composite or S-Video or Component Video
Input
Audio Recorder
Tape
Tape L/R Inputs
, Optical Digital 1/2** or Coaxial Digital 1/2** Inputs
Tape L/R Outputs
, Digital Optical** or Coaxial Outputs**
Not required
TV or Video Display
Not applicable
Not required
Not required
Monitor-Out
Composite and/or S-Video and/or Component
*
Check with your cable company to determine whether digital audio is available for all channels. It may be necessary to make BOTH analog and digital connections if it is not.
**
Digital audio recorders only.
250 Crossw
ays P
ark Drive
,W
oodbury
,New
Yo
rk 11797 www
.harmankardon.com
© 2004 Harman International Industries
,Incorpor
ated P
art No
.CQE1A234Z
A Harman International Company
Figure 5 – Source Component Connections
Dashed lines (
– – – –
) indicate coaxial and optical digital audio connections. Choose either type
(but not both) for each digital audio source.
Dotted lines (
••••
) indicate component, composite or S-video connections. Component video is
the preferred connection when available, but you may use any of the three types (but not more
than one). When component, composite and S-video sources are connected to the AVR, you must
also connect all outputs from the AVR to your TV.
®
