manualshive.com logo in svg

Harman Kardon Citation Amp, Owner'S Manual

Share
Download
Harman Kardon Citation Amp Owner'S Manual Download Page 44

/ 

TR
O

U

B

L

E

S

H

O

O

TI
N

G

44

•  The Citation Amp is already connected to another 

Bluetooth device. Press and hold   for 3 seconds on 
the remote control to disconnect and pair with a new 
device.

Poor audio quality from a connected Bluetooth device.

•  The Bluetooth reception is poor. Move the device 

closer to the Citation Amp, or remove any obstacle 
between them.

Internet

Failed to connect to Wi-Fi.

•  Check if your router works.
•  Follow the instructions in the Google Home app to 

complete the Wi-Fi setup.

•  Make sure that you have selected the right network and 

entered the correct password.

•  Make sure that your router or modem is turned on and 

within the range.

•  Make sure that your Citation Amp is connected to the 

same wireless LAN as your smartphone or tablet.

The Google Home app cannot find the device.

•  Make sure that your Citation Amp is powered on.
•  Make sure that your network (Wi-Fi or Ethernet) is 

working properly.

•  Make sure that your router or modem is powered on 

and within the range.

Summary of Contents for Citation Amp

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands