Harman Kardon CDR 20 Service Manual Download Page 7

Page: 7 / 85

Front-Panel Controls

Finalize:

Press this button when a record-

ing is complete to initiate the finalization
process.

The Play/Select Button

must be pressed within three seconds to acti-
vate finalization. Until this button is pressed
and the finalization process is complete, CD-R
discs may not be played on conventional CD
machines. See page 22 for more information on
finalization.

Speed:

Press this button to select the

recording speed for internal dubs. See page 20
for more information on selecting the proper
speed.

Record-Deck Open:

Press this button to

open the Record Deck

Record Deck:

This Disc Deck is used to

record or play back CD, CD-R and CD-RW discs.

Analog-Record Level Control:

The con-

trol is used to adjust the input level when mak-
ing recordings from analog sources such as cas-
settes, or when CDs are recorded in an analog
mode. See page 22 for more information on
record levels.

Record-Deck Stop:

Press this button to

stop the CD in the Record Deck.

Record-Deck Play/Select:

This button

has two functions. It may be pressed when a
standard CD is in the Record Deck to put the
machine in play, or it may be used to enter a
selection or start certain record functions.

(

Record-Deck Pause:

When the Record

Deck is in the Play mode, pressing this button
will pause the disc. If the disc has previously
been paused, pressing this button will restart
the playback.

Record-Deck Next:

When a disc is play-

ing in the Record Deck

, press and hold this

button to play the disc in a fast-forward mode
to quickly locate a desired passage. At any time,
tapping the button and quickly releasing it will
move to the next track on a disc in play.

Record Deck Previous:

This button has

two functions. When a disc is playing in the
Record Deck

, press and hold this button to

play the disc in a fast reverse mode to quickly
locate a desired passage. At any time, tapping
the button and quickly releasing it will move to
the beginning of the current track, and the next
press will move to the previous track. When a
disc is stopped, each press will move back one
for programming or play when the disc is
stopped. Once a track is entered, it may be
played by simply pressing the

Play

button



Input Select:

Press this button to select

the input source (analog or digital coax) for
recording. See page 22 for more information on
input selection.

Record-Deck Display Select:

Press this

button to cycle through the time display options
for the Record Deck. See page 17 for more
information on the time display.

Information Display:

The indicators in

the Information Display provide status reports
on the operation of the CDR 20. See page 7 for
complete explanations of each indicator.

Remote Sensor:

The IR sensor that

receives the commands from the remote control
is behind this area. Do not cover or obscure this
part of the front panel to avoid any malfunction
with the remote.

Play-Deck Display Select:

Press this but-

ton to cycle through the time display options
for the Play Deck. See page 17 for more infor-
mation on the time display.

Dual-Play Selector:

Press this button to

enable both CD decks to play at the same time
and function as separate, independent CD
units. In this mode it is also possible to record
from an external source while the Play Deck is
functioning as a standard CD player. See page
17 for more information on dual-play capability.

Play-Deck Next:

When a disc is playing in

the Play Deck

, press and hold this button to

play the disc in a fast-forward mode to quickly
locate a desired passage. At any time, tapping
the button and quickly releasing it will move to
the next track on a disc in play.

Play-Deck Previous:

This button has two

functions. When a disc is playing in the Play
Deck

, press and hold this button to play the

disc in a fast-reverse mode to quickly locate a
desired passage. At any time, tapping the but-
ton and quickly releasing it will move to the
beginning of the current track, and the next
press will move to the previous track. When a
disc is stopped, each press will move back one
track for programming or play when the disc is
stopped. Once a track is entered, it may be
played by simply pressing the

Play

button

˘j

Play-Deck Pause:

When the Play Deck is

running, pressing this button will pause the
disc. If the disc has previously been paused,
pressing this button will restart the playback.

Play-Deck Play:

Press this button to begin

playback of a CD in the Play Deck or the dub-
bing process.

Play-Deck Stop:

Press this button to stop

the CD in the Play Deck.