Harman Kardon CDR 2, Service Manual

Page: 14 / 116

Troubleshooting Guide and Error Messages
TROUBLE SHOOTING GUIDE
SYMPTOM POSSIBLE CAUSE SOLUTION
Unit does not operate when Standby switch • No AC power • Make certain AC power cord is plugged into a live outlet.
or remote Power-On is pressed • Check to see if AC outlet is switch controlled.
• Main Power Switch is off • Turn on Main Power
Remote does not function • Wrong deck selected • Press the CDP button to control the Play Deck;
press the CDR button to control the Record Deck
• Dead batteries • Replace both batteries
• Sensor blocked • Remove obstructions from front panel or
connect a remote sensor to the Remote-In Jack
Disc does not erase • CD-R disc in use • CD-R discs do not erase. Use a CD-RW disc
Recorded CD-R disc does not play in • CD-R disc not finalized • Finalize the CD-R disc in the CDR 2’s Record Deck
another CD player or
DISC ERROR
(see page 22)
message appears in Play Deck
Recording suddenly stops • Input source stopped or paused • Recordings will always stop when the input source
is paused for more than 3 seconds for digital recordings
and 10 seconds for analog recordings
ERROR MESSAGES
ERROR MESSAGE EXPLANATION AND PROBABLE CAUSE SOLUTION
CHECK DISC
• A record-related button has been pressed when a • Unfinalize the disc to add tracks to a CD-RW disc
Finalized disc is in the Record Deck
%
• Replace the disc with a blank CD-R or CD-RW disc
• A record-related button has been pressed when a • Replace the disc with a blank CD-R or CD-RW disc
standard CD is in the Record Deck
%
DATA DISC
• A non-audio CD-ROM or a CD-Video disc has been • Only CD Audio and DTS discs will play in the CDR 2;
placed in the machine replace the disc
DISC ERROR
• An Unfinalized disc has been placed in the Play Deck
3
• Finalize the disc (see page 22)
• A DVD disc has been placed in the unit • Replace the disc. The CDR 2 does not play or dub DVD discs
DISC FULL
• There is not enough time left on the disc to complete • Use another blank CD-R or CD-RW disc
a planned recording • Erase one or more tracks on a CD-RW disc
ERROR
• The dsic is not seated properly • Open the drawer and check to see that the disc is properly seated
• There is a problem with the disc • Try another disc
FAILED
• A dub has not been completed properly • Check the play disc
• Repeat the dub process
FULL
• More than 20 tracks have been programmed • Clear all programmed tracks over 20 (see page 18)
NO AUDIO
• A record-related button has been pressed when • Replace the disc with a blank CD-R or CD-RW Audio disc
a non-audio disc is in the Record Drawer
%
SVC-1
• There is an internal problem with the CDR 2 • Contact an authorized Harman Kardon service depot
CDR2
harman/kardon
14