Harman Kardon AVR35 Service Manual Download Page 8

Page: 8 / 86

Mute :

Bypass :

Analog :

Dolby Digital Indicator :

OPT. :

Dolby Pro-Logic Surround Mode

Indicators :

COAX.Source :

This indicator illuminates to remind

you that the AVR 35's output has been silenced
by pressing the Mute button

Press the Mute button again to return to the
previously selected output level.

This indicator illuminates when

the surround processing has been disabled by
pressing Surround Off button

. When this

indecator is it, the AVR-35 will play transitional
stereo sound using the front left and right
speakers only.

This indicator illuminates when an

analog input source is in use.

This indicator

illuminates when a Dolby Digital source is
being played.

This indicator illuminates when a

digital source is in use via a connection to the
Optical Digital input.

These indicators illuminate when

one of the analog (matrix) or Digital(PCM)
Dolby Surround modes is in use.

This indicator illuminates

when a digital source is in use via a connection
to the Coaxial Digital input.

AC-3 Indicator :

This indicator illuminates

when a AVR-35 is decoding a Dolby Digital
input source.

This indicator illuminates

to show that a standard PCM(SP/DIF) digital
audio signal is being decoded by the digital-to-
analog converter.

These

indicators illuminate when one of the DSP
generated analog surround modes is in use
with an analog input source.

This indicator lights when

the AVR-35 is in the Night mode, which
prevents the AVR-35 from loud playback when
digital sources are in use.

This two-digit display

indicates the station preset number that is
currently in use, or of that is being entered.

This indicator illuminates

when one of the stations entered into the
preset memory is tuned. The number that
appears below the indicator is the preset
station's memory.

This indicator flashes when

entering presets and other information into the
tuner's memory.

PCM Indicator :

Surround Mode Indicators :

Night Indicator :

Preset Number :

Preset Indicator :

Memory :

Digital(AC-3) signal or a standard PCM digital
source.

Connect the

optical digital output from a DVD player, HDTV
receiver, LD player or CD player to this jack.
The signal may be either a Dolby Digital (AC-
3)signal or a standard PCM digital source .

If the AVR-35's front panel

IR sensor is blocked due to cabinet door or
other obstructions, an external IR sensor may
be used. Connect the output of the sensor to
this jack.

This connection permits

the IR sensor in the receiver to serve other
remote controlled devices. Connect this jack to
the "IR IN" jack on Harman Kardon or other
compatible equipment.

Connect these jacks to

the PLAY/OUT jacks of an audio recorder.

Connect these jacks

to the RECORD / INPUT jacks of an audio
recorder.

AC-3/PCM Optical Input :

Remote IR In :

Remote IR Out :

Tape Monitor In :

Tape Monitor Out :

Surround :

Unswitched AC Outlet :

NOTE :

Switched AC Outlet :

Power Cable :

Video 2 Inputs :

TV Monitor Video Output :

AC-3/PCM Coaxial Input :

Connect these terminals to the

surround speaker.

This outlet may

be used to power any AC device. The power
will remain on at this outlet regardless of
whether the AVR-35 is on or not.

The power consumption of the device

plugged into each of these outlets should not
exceed 100 watts.

This outlet may be

used to power any device that you wish to turn
on when the unit is turned on wiht the System
Power Control switch.

Connet the AC plug to

non-switched AC wall output.

Connet these jacks to the

audio and video outputs of a TV Tuner. Cable
TV converter box, satellite receiver of any other
audio/video source.

Connet this

jack to the standard(composite) video input of
a TV monitor or video projector to view the on-
screen menus and the output of any standards
video source selected by the receiver's video
switcher.

Connect the

coax digital output from a DVD player to this
jack. The signal may be either a Dolby

Auto :

Stereo Indicator :

Mono Indicator :

FM Mode

Tuned Indicator :

Main Information Display :

Sleep Indicator :

This indicator illuminates when the

"Auto" mode is in use for FM tuning.

This indicator illuminates

when an FM station is being tuned in stereo.

This indicator illuminates

when the tuner has been placed in the
monaural mode by pressing the
button

. Set the tuner for mono listening to

cut noise and improve the quality of distant
stereo signals.

This indicator illuminates

when a station is being received with sufficient
signal strength to allow for acceptable listening
quality.

This display

shows messages relating to the status, input
source, surround mode, tuner, volume level or
other aspects of unit's operation.

This indicator is

illuminated when the Sleep function is in use.
The number that appears above the indicator is
the number of minutes remaining before the
AVR-35 will return to the Standby mode.

AM Antenna :

Connect the AM loop

antenna supplied with the receiver to these
terminals. If an external AM antenna is used,
make connections to the AM and GND
terminals in accordance with the instructions
supplied with antenna.

Connect an indoor or

external FM antenna to this terminal.

FM Antenna :

Video 1 Inputs :

Video Outputs 1:

CD Inputs

DVD Inputs

Subwoofer Pre-Out :

Front :

Center :

Connect these jacks to

the audio and video PLAY/OUT jacks of a VCR.