Harman Kardon AVR 7300 Service Manual Download Page 17

Page: 17 / 158

MAIN REMOTE CONTROL FUNCTIONS

Delay Select Button:

This button selects

adjustments to the A/V Sync Delay and the individual
channel delays. The first press of the button displays
an

A/V SYNC DELAY

message in the

Lower

Display Line

and in the on-screen display, which

means that you may change the amount of time that
all channels are delayed together behind the video.
This enables you to compensate for the loss of lip
sync that may be caused by digital video processing
in your display or by television stations. To change
the A/V Sync Delay, press the

Set Button

while

the

A/V SYNC DELAY

message is visible

and then use the

⁄

Navigation Button

to change the setting so that the sound and the
video image are in sync. To change the delay for
an individual output channel, press the

⁄

Navigation Button

until the desired channel

name is shown, and then press the

Set Button

Use the

⁄

Navigation Buttons

to change

the delay amount. (See page 28 for more information
on delay options.)

Speaker Select Button:

Press this button

to begin the process of configuring the AVR 7300’s
bass management system. Then press the

⁄

Navigation Button

to select the channel you

wish to set up. Press the

Set Button

and

then select another channel to configure. When all
adjustments have been completed, press the

Set

Button

twice to exit the settings and return to

normal operation. (See page 26 for more information
on speaker setup.)

Memory Button:

Press this button to enter a

radio station to the AVR 7300’s preset memory. First,
tune the desired station, and then press this button.
Within five seconds of when you see the station’s
frequency flash in the

Upper Display Line

and

in the on-screen display, press the numeric keys
for the preset number between 01 and 30 that you
wish to assign to the station. (See page 39 for more
information.)

Stereo Mode Select Button:

Press this button

to select a stereo listening mode. When the button is
pressed so that

SURROUND OFF

appears in

the

Lower Display Line

, the AVR will operate in

a bypass mode with true, fully analog, two-channel

left/right stereo mode with no surround processing or
bass management, as opposed to other modes where
digital processing is used. When the button is pressed
so that

SURROUND OFF

appears in the

Lower

Display Line

, and the

DSP

and

SURROUND

OFF

Surround Mode Indicators

are lit, you will

enjoy a two-channel presentation of the sound along
with the benefits of bass management. Depending on
whether your system is configured for 5.1 or 6.1/7.1
channels, the next press of the button will cause either

5 CH STEREO

7 CH STEREO

appear, and the stereo signal will be routed to all five
(or seven) speakers. (See page 36 for more informa-
tion on stereo playback modes.)

DTS Neo:6 Mode Select Button:

Press this

button as needed to select one of the DTS Neo:6
modes. (See page 36 for the available DTS Neo:6
options.)

Logic 7 Mode Select Button:

Press this button

to select from among the available Logic 7 surround
modes. (See page 36 for the available Logic 7 options.)

DTS Digital Mode Select Button:

When a

DTS-encoded digital source is playing, each press of
this button will scroll through the available DTS modes.
The specific choice of modes will vary according to
the type of encoding on the disc and your system’s
speaker configuration. When a DTS source is not in
use, this button has no function. (See page 36 for the
available DTS digital options.)

Dolby Mode Select Button:

This button is used

to select from the available Dolby Surround modes.
Each press of this button will select one of the Dolby
Pro Logic II or Dolby Pro Logic IIx modes. When a
Dolby Digital-encoded source is in use, Dolby Digital
or Dolby Digital EX mode may also be selected.
(See page 36 for the available Dolby surround
mode options.)

6/8-Channel Input Select:

Press this button to

select the device connected to the

8-Channel Direct

Inputs

. (See page 34 for more information.)

SPL Select Button:

This button activates the

EzSet function to quickly and accurately calibrate the
AVR 7300’s output levels. When the button is

pressed, you will then need to select between auto-
matic EzSet operation or using the remote as a manu-
al SPL meter by pressing the

⁄

Navigation

Button

until your choice appears in the remote’s

LCD display. Press the

Set Button

to enter the

setting, and then follow the instructions as displayed
in the LCD display. (For complete information, see
page 29.)

EzSet Microphone Sensor:

The microphone

sensor that is used by the EzSet system is behind the
three slots at the top of the remote control. When
using EzSet to calibrate the AVR 7300, be certain that
the slots are not covered. (See page 29 for more
information on using EzSet.)

Lens:

The infrared emitters behind the plastic

lens at the top of the remote communicate the remote
codes to the AVR 7300. Be certain that the lens is not
covered when using the remote, and point the lens
toward the AVR for best results. In learning mode, the
remote receives IR codes to be learned through a
sensor behind the lens.

NOTE:

DO NOT remove the rubber plug that is supplied

to cover the jack on the upper right side of the remote.
The jack is not active and is reserved for future use.

MAIN REMOTE CONTROL FUNCTIONS

AVR7300(120v)-OM 6/14/04 9:15 AM Page 16

AVR7300

harman/kardon