Harman Kardon AVR 70/230, Service Manual

Page: 58 / 89

INTEGRATED CIRCUIT
M3030RXXPXP
GNOK-M3030RXXPXP-00 3/66
1.2 Performance Outline
Table 1.1 lists Performance Outline of M16C/30P Group.
NOTES:
1. IEBus is a registered trademark of NEC Electronics Corporation.
2. Use the M16C/30P on VCC1 = VCC2.
Table 1.1 Performance Outline of M16C/30P Group
Item Performance
CPU
Number of Basic Instructions 91 instructions
Minimum Instruction
Execution Time
62.5ns(f(XIN)=16MHz, VCC1=VCC2=3.0 to 5.5V, no
wait)
100ns(f(XIN)=10MHz, VCC1=VCC2=2.7 to 5.5V, no wait)
Operation Mode
Single-chip, memory expansion and microprocessor
mode
Memory Space 1 Mbyte
Memory Capacity See Table 1.2 Product List
Peripheral
Function
Port Input/Output : 87 pins, Input : 1 pin
Multifunction Timer
Timer A : 16 bits x 3 channels,
Timer B : 16 bits x 3 channels
Serial Interface
1 channels
Clock synchronous, UART, I
2
CBus, IEBus
(1)
2 channels
Clock synchronous, UART, I
2
CBus
(1)
A/D Converter 10-bit A/D converter: 1 circuit, 18 channels
DMAC 2 channels
CRC Calculation Circuit CCITT-CRC
Watchdog Timer 15 bits x 1 channel (with prescaler)
Interrupt
Internal: 20 sources, External: 7 sources, Software: 4
sources, Priority level: 7 levels
Clock Generating Circuit
2 circuits
Main clock generation circuit (*),
Subclock generation circuit (*),
(*)Equipped with a built-in feedback resistor.
Electric
Characteristics
Supply Voltage
(2)
VCC1=VCC2=3.0 to 5.5 V (f(XIN)=16MHz)
VCC1=VCC2=2.7 to 5.5 V (f(XIN)=10MHz, no wait)
Power Consumption
10 mA (VCC1=VCC2=5V, f(XIN)=16MHz)
8 mA (VCC1=VCC2=3V, f(XIN)=10MHz)
1.8
P
A (VCC1=VCC2=3V, f(XCIN)=32kHz, wait mode)
0.7
P
A(VCC1=VCC2=3V, stop mode)
One time flash
version Program Supply Voltage 3.3±0.3 V or 5.0±0.5 V
Flash memory
version Program/Erase Supply
Voltage 3.3±0.3 V or 5.0±0.5 V
Program and Erase
Endurance 100 times (all area)
Lite flash
memory
version Program/Erase Supply
Voltage 3.3±0.3 V or 5.0±0.5 V
Program and Erase
Endurance 100 times (all area)
Operating Ambient Temperature -20 to 85
q
C, -40 to 85
q
C
Package 100-pin plastic mold QFP, LQFP