Harman Kardon AVR 55, Service Manual

Page: 7 / 84

Front Panel Information Display
AVR55 120 volt
DIGITAL HALL THEATER STADIUM CHURCH SLEEP
SOURCE
VID 2
DVD
TV
PRO LOGIC
VID
1
REC CONTOUR STEREO TUNED AUTO MEMORY PRESET T MON
•
3 STEREO
-
F
M L K J I G H
B A D E C
A
Vid 1 Record Indicators
B
Dolby Digital Indicator
C
Analog Dolby Surround Mode Indicators
D
Analog Surround Mode Indicators
E
Sleep Indicator
F
Main Information Display
G
Preset Indicator
H
Memory Indicator
I
Auto Mode In Indicator
J
Tuned Indicator
K
T-Mon Indicator
L
Stereo Indicator
M
Contour Indicator
A
Vid 1 Record Indicators: A dot
appears next to one of the sources
shown in this indicator to tell you
which input has been selected as
the output to the device connected
to the
Video 1 Out jacks
›
. Press
the Vid 1 Rec button
&
to change
the source.
B
Dolby Digital Indicator: This
indicator illuminates when a Dolby
Digital source is being played.
C
Analog Dolby Surround Mode
Indicators: These indicators illumi-
nate when one of the analog (matrix)
dolby Surround modes is in use.
D
Analog Surround Mode
Indicators: These indicators illumi-
nate when one of the DSP generated
analog surround modes is in use.
E
Sleep Indicator: This indicator is
illuminated when the Sleep function
is in use. The number that appears
above the indicator is the number of
minutes remaining before the AVR55
will return to the Standby mode.
F
Main Information Display: This
display shows messages relating to
the status, input source, surround
mode, tuner, volume level or other
aspects of unit’s operation.
G
Preset Indicator: This indicator
illuminates when one of the stations
entered into the preset memory is
tuned. The number that appears
below the indicator is the preset
station’s memory.
H
Memory Indicator: This flashes
after the Memo button
4 u
has
been pressed to indicate that you
should quickly select and enter a
preset memory location for a specific
radio station.
I
Auto Mode In Indicator: This
indicator illuminates when the “Auto”
mode is in use for FM tuning.
J
Tuned Indicator: This indicator
illuminates when a station is being
received with sufficient signal
strength to allow for acceptable
listening quality.
K
T-Mon Indicator: This indicator
illuminates when the Tape Monitor
function is in use to remind you that
you are listening to the record output
of the device connected to the
Tape
1 Record jacks
‚
, not to the actual
input source shown in the
Information Display .
L
Stereo Indicator: This indicator
illuminates when an FM station is
being tuned in stereo.
M
Contour Indicator: This indicator
illuminates when the Contour circuits
have been engaged by pressing the
Contour button
¯
.