DVD PLAYER
VCR (Video 1)
In/Rec
Out/Play
L
R
VIDEO
Component Video
Y
Pb
Pr
Optical Coax
L
R
Video
S-Video
Cable Box or Satellite Receiver (Video 3)
OUT
L
R
Video S-Video
Optical Coax
Component Video
Y
Pb
Pr
TV or Video Display
IN
Video S-Video Component Video
Y
Pb Pr
VIDEO CONNECTIONS
Device Connection Options
:
Recommended connections are shown in red, but connections may be made to best fit your system requirements. The Video 4, Coaxial 4 and Optical 4 inputs are on the front panel of the receiver.
Device
Input Name
Audio Input Connections
Audio Output Connections
Video Connections
CD Player
CD
CD
L/R Inputs, Optical Digital 1, 2 or 3, or
Coaxial Digital
1,
2
or 3
Not required
Not required
DVD Player
DVD
Coaxial Digital 1
, 2 or 3, Optical Digital 1, 2 or 3, or DVD L/R Inputs
Not required
DVD Component Video Input,
DVD Composite or S-Video
VCR Video
1
Video 1 L/R Inputs
Video 1 L/R Outputs
Video 1
Composite or S-Video
Input and Output
Cable Box or Satellite Receiver
Video 3
Video 3 L/R Inputs,
Optical Digital 1, 2 or 3
*
, or Coaxial Digital 1, 2 or 3
*
Inputs
Not required
Component V2,
Video 3 Composite or S-Video
Audio Recorder
Tape
Tape L/R Inputs,
Optical Digital 1, 2 or 3, or Coaxial Digital 1, 2 or 3 Inputs
Tape L/R Outputs,
Digital Optical
**
or Coaxial Outputs
**
Not required
TV or Video Display
Not applicable
Not required
Not required
Monitor-Out
Component, Composite and/or S-Video.
*
Check with your cable company to determine whether digital audio is available for all channels. It may be necessary to make BOTH analog and digital connections if it is not.
**
Digital audio recorders only.
250 Crossw
ays P
ark Drive
,W
oodbury
,New
York 11797 www
.harmankardon.com © 2004 Harman International Industrie
s,
Incorpor
ated P
art No
.ZKC1116HA00-8C
Power for the Digital Revolution
.
®
®
Figure 6 – Video Connections
Dashed lines (
– – – –
) indicate coaxial and optical digital audio connections. Choose either type (but not both) for each
digital audio source.
Dotted lines (
••••
) indicate component, composite or S-video connections. Component video is the preferred connection
when available, but you may use any of the three types (but not more than one). When component, composite and
S-video sources are connected to the AVR you must also connect all outputs from the AVR to your TV.
