manualshive.com logo in svg

Harman Kardon AVR 3500, Owner'S Manual

Share
Download
Harman Kardon AVR 3500 Owner'S Manual Download Page 16

16

INSTALLATION AND CONNECTIONS

Installation and Connections

AC Power Connections

This unit is equipped with two accessory AC out-
lets. They may be used to power accessory
devices, but they should not be used with high-
current draw equipment such as power ampli-
fiers. The total power draw to the 

Unswitched

Outlet 

G

must not exceed 100 watts, that to

the 

Switched

Outlet 

F

50 watts.

The 

Switched

F

outlet will receive power only

when the unit is on completely. This is recom-
mended for devices that have no power switch
or a mechanical power switch that may be left in
the “ON” position.

NOTE:

Many audio and video products turn to

Standby mode only when they are used with
switched outlets, and cannot be fully turned on
using the outlet alone without a remote control
command.

The 

Unswitched

G

outlet will receive power

as long as the unit is plugged into a powered AC
outlet and the 

Main Power 

Switch 

1

is on.

Finally, when all connections are complete, plug
the power cord into a nonswitched 220-240-volt
AC wall outlet. You’re almost ready to enjoy the
AVR 3500!

Summary of Contents for AVR 3500























































Reviews:

No comments

Brands by name

Popular brands

Load more brands