Harman Kardon AVR 220 Service Manual Download Page 13

Page: 13 / 122

REMOTE CONTROL FUNCTIONS

DVD or LD player, depending on how the
remote has been programmed.

Tuner Mode:

Press this button when the

tuner is in use to select between automatic
tuning and manual tuning. When the button is
pressed so that the

AUTO Indicator

goes

out, pressing the

Tuning Buttons

will

move the frequency up or down in single-step
increments. When the FM band is in use, press-
ing this button when a station’s signal is weak
will change to monaural reception. (See page
28 for more information.)

Direct Button:

Press this button when

the tuner is in use to start the sequence for
direct entry of a station’s frequency. After press-
ing the button simply press the proper

Numeric Keys

to select a station. (See

page 28 for more information on the tuner.)

Tuning Up/Down:

When the tuner is in

use, these buttons will tune up or down through
the selected frequency band. If the

Tuner Mode

Button

has been pressed so that the

AUTO Indicator

is illuminated, pressing and

holding either of the buttons for three seconds
will cause the tuner to seek the next station with
acceptable signal strength for quality reception.
When the

AUTO Indicator

is NOT illumi-

nated, pressing these buttons will tune stations
in single-step increments. (See page 28 for more
information.)

OSD Button:

Press this button to activate

the On Screen Display (OSD) system used to set
up or adjust the AVR 220’s parameters.

Macro Buttons:

Press these buttons

to store or recall a “Macro”, which is a
preprogrammed sequence of commands
stored in the remote. (See page 34 for more
information on storing and recalling macros.)

Transport Controls:

These buttons do

not have any functions for the AVR 220, but
they may be programmed for the forward/
reverse play operation of a wide variety of CD
or DVD players, and audio or video cassette
recorders. (See page 35 for more information
on programming the Transport Control Punch-
Through capability of the remote.)

Skip Up/Down Button:

This button has a

direct function with the AVR 220, but when
used with a compatibly programmed CD or
DVD changer they will change the disc currently
being played in the changer.

Disc Skip Button:

This button has no

direct function for the AVR 220, but is often
used when the remote is programmed to oper-
ate a CD or DVD changer to change the discs in
the changer. (See page 34 for more information
on using the remote with other devices.)

Preset Up/Down:

When the tuner is

in use, press these buttons to scroll through the
stations programmed into the AVR 220’s mem-
ory. When some source devices, such as CD
players, VCRs and cassette decks, are selected
using the device

Input Selectors

, these

buttons may function as Chapter Step or Track
Advance.

Clear Button:

Press this button to clear

incorrect entries when using the remote to
directly enter a radio station’s frequency.

Memory Button:

Press this button to

enter a radio station into the AVR 220’s preset
memory. Once the

MEMORY Indicator

flashes, you have five seconds to enter a preset
memory location using the

Numeric Keys

. (See page 29 for more information.)

Delay/Prev Ch.:

Press this button to

begin the process for setting the delay times
used by the AVR 220 when processing surround
sound. After pressing this button, the delay
times are entered by pressing the

Set Button

and then using the

⁄

Buttons

to change the setting. Press the

Set Button

again to complete the process. (See page

18 for more information.)

›

Button:

Press this button to change a

setting or selection when configuring many of the
AVR 220’s settings.

Speaker Select:

Press this button

to begin the process of configuring the
AVR 220’s bass management system for use
with the type of speakers used in your system.
Once the button has been pressed, use the

⁄

Buttons

to select the channel

you wish to set up. Press the

Set Button

and then select another channel to configure.
When all adjustments have been completed,
press the

Set Button

twice to exit the

settings and return to normal operation. (See
page 19 for more information.)

Spare Button:

This button does not have

any function for the operation of the AVR 220,
but it is available for use when programmed
with the code from another remote. (See page

33 for information on programming the remote
with codes for other devices.)

Volume Up/Down:

Press these buttons to

raise or lower the system volume. See page 35
for more information on programming the
Volume Control Punch-Through capability of the
remote, which allows you to change the AVR
220’s volume while the remote is set to control
another device.

TV/Video Selector:

This button does not

have a direct function on the AVR 220, but
when used with a compatibly programmed
VCR, DVD or satellite receiver that has a
“TV/Video” function, pressing this button will
switch between the output of the player or
receiver and the external video input to that
player. Consult the owner’s manual for your
specific player or receiver for the details of how
it implements this function.

SPL Button:

This button activates the AVR

220’s EzSet function to quickly and accurately
calibrate the AVR 220’s output levels. Press and
hold the button for three seconds and then
release it. Note that the Test Tone will begin cir-
culating, and the

Program/SPL Indicator

will change colors. During this sequence, EzSet
will automatically adjust the output levels for
all channels until they have equal output levels,
as shown by the

Program/SPL Indicator

lighting green for each channel. Press this but-
ton again when the adjustment is complete to
turn off the test tone. (See page 21 for more
information on EzSet.)

6-Channel Direct Input:

Press this but-

ton to select the component connected to the

6-Channel Direct Input

as the source.

Mute:

Press this button to momentarily

silence the AVR 220 or TV set being controlled,
depending on which device has been selected.

When the AVR 220 remote is being programmed
to operate another device, this button is pressed
with the

Input Selector Button

to begin

the programming process. (See page 33 for
more information on programming the remote.)

EzSet Sensor Microphone:

The sensor

microphone for the EzSet microphone is behind
these slots. When using the remote to calibrate
speaker output levels using EzSet, be sure that
you do not hold the remote in a way that cov-
ers these slots. (See page 21 for more informa-
tion on using EzSet.)