background image

14

AVR 158

Making Connections, continued

HDMI devices

If any of your source devices have hdMI connectors, using those connectors will provide 

the best possible video and audio performance quality. Since the hdMI cable carries 

both digital video and digital audio signals, you do not have to make any additional audio 

connections for devices you connect via hdMI cables, although you can assign one of 

the digital audio connectors to one of the hdMI inputs.

AVr 

hdMI connectors

hdMI-equipped 

Source device

hdMI cable 

(not supplied)

to hdMI 

output

Component video devices

If your blu-ray disc or dVd player does not have an hdMI connector but does have a 

component video connector, using the component video connector will provide superior 

video performance. You will also need to make an audio connection from the player to 

the AVr.

AVr dVd component 

Video connectors

component Video 

cable (not supplied)

to component 

Video outputs

component Video-equipped 

blu-ray disc or dVd player

Composite video devices

You will need to make composite video connections from your source devices that do  

not have hdMI or component video connectors. You will also need to connect the source  

device’s analogue audio outputs to the AVr’s corresponding analogue audio connectors.

IMPORTANT:

  If  you  connected  your  blu-ray  disc  or  dVd  player  to  the  AVr’s  dVd 

component Video Input connectors, do not connect a source device to the AVr’s dVd 

composite Video Input connector.

AVr composite 

Video connectors

composite Video 

cable (not supplied) to composite 

Video output

composite Video-equipped 

Source device

Optical digital audio devices

If your source devices have optical digital outputs, connect them to the AVr’s optical 

digital Audio connectors. 

NOTE:

 Make only one type of digital connection (hdMI, optical 

or coaxial) from each device.

optical digital Audio 

cable (not supplied)

to optical digital 

Audio output

optical digital-equipped 

Source device

AVr digital Audio  

connectors

Coaxial digital audio devices

If your source devices have coaxial digital outputs, connect them to the AVr’s coaxial 

digital Audio connectors. 

NOTE:

 Make only one type of digital connection (hdMI, optical 

or coaxial) from each device.

coaxial digital Audio 

cable (not supplied)

to coaxial 

digital output

coaxial digital-equipped  

Source device

AVr digital Audio  

connectors

Analogue audio devices

Make analogue audio connections from your source devices that do not have hdMI or 

digital audio connectors. If you’re connecting video sources to the dVd, Video 1 or Video 

2 audio inputs, you must also connect the source device’s composite video output to the 

corresponding composite video connector.

Stereo Audio cable 

(not supplied)

to Stereo Analogue 

Audio output

Analogue Source device

AVr Analogue  

Audio connectors

0296CSK - HK (x65Series) AVR158-230 OM [HKP1992], WORK05.indd   14

30/06/11   14:00:02

Summary of Contents for AVR 158











































Reviews: