Harman Kardon AVR 155, Service Manual

Page: 5 / 92

Erase a macro as follows:
1. Simultaneously press and hold the Mute Button and the Macro Button
containing the macro until the LED flashes.
2. Press the Surround Button to erase the macro.
Resetting the Remote
To reset the remote to its factory defaults, simultaneously press and hold any
Input Selector and the “0” Numeric Key. When the Program LED flashes in
amber, enter the code “333”. When the green LED goes out, the remote will have
been fully reset.
Processor Reset
There may be instances when you wish to fully reset the AVR 154 to its factory
defaults, or the unit may behave erratically after a power surge. To correct erratic
behavior, first try turning the Master Power Switch off and unplugging the AC
power cord for at least three minutes. Plug the cord back in and turn the receiver
back on. If this doesn’t help, try a system reset.
NOTES:
•
A system reset erases all user configurations, including video resolution,
speaker and level settings, and tuner presets. After a reset, you will need
to reenter all of these settings.
To reset the AVR 154,
place the receiver in Standby mode (press the front-
panel Standby/On Switch so that the Power Indicator turns amber).
Press and hold the front-panel Surround Mode Button for 5 to 10 seconds
until the RESET message appears in the display.
Follow the directions in the owner’s manual on page 32 to restore the picture if
necessary.
Memory
If the AVR 154 is unplugged or experiences a power outage, it will retain user
settings for up to four weeks.
AVR154
harman/kardon
harman/kardon AVR 155/230 Service Manual
Page 5 of 92