Harley Benton Bass-Guitar Kit P-Style
6
Neck
With the body placed face up on a protective surface, position the neck into the neck cutout until it is fully
inserted.
Turn the assembly over and position the neck plate (with its black protective seal) over the four bolt holes at
the rear of the body and drive in the four long screws through the neck plate, body and pilot holes in the neck
until all fits tightly.
Wiring
The pickups and controls are pre-assembled on the pick-guard and simply need to be connected to the output
jack socket and earth. Wiring is implemented as plug-in modules, soldering is not required.
There are two loose cables in the wiring assembly. One cable has a connector and the other one has no connec-
tor. Gently thread the red cable (connector lead, with connector) through the hole behind the tone control cavity
to the separate routing for the pickup cavity. Insert the blue cable (string grounding cable, without connector)
into the small hole until it runs through the hole under the bridge. String grounding reduces noise (hum).
