Harley Benton HBW-80, User Manual, Page: 17 / 28

11 [STANDBY]
Push button to enable or disable the energy saving mode.
If the power is on and there is no signal input at the
[INPUT] jack for 15 minutes, the device will automatically enter
standby mode. As soon as the [INPUT] jack receives a instrument signal, the device switches back to normal mode.
LED [ACTIVE]
Power indicator LED. This LED is permanently on in normal mode. It goes off when the energy-saving mode is ena‐
bled and the box enters the standby mode.
LED
[STANDBY]
Standby mode. This LED lights up when the energy saving mode is enabled and the box enters the standby mode. It
goes off again when the box switches back to normal.
12 [POWER]
Use the mains switch to turn the unit on or off.
Components and functions
HBW-80
17