- 5 -
2. Control Elements
2.1 Front panel
(HB115B MK III front panel)
INPUT
connect your bass guitar here
GAIN
to adjust the input sensitivity
COMPRESSOR
activates the compressor, to reduce the dynamic range,
makes your bass sound tighter
COMP. RATE
to set the compression value
CONTOUR
this circuit lets you shape the character of your tone
CONT. GRADE
if CONTOUR is activated, you can use this control to
figure out your favourite contour setting
BASS
to decrease / increase the low frequencies
LOW MID
to decrease / increase the low middle frequencies
HIGH MID
to decrease / increase the high middle frequencies
TREBLE
to decrease / increase the high frequencies
DEEP
to additionally boost the low frequencies
BRIGHT
to additionally boost the high frequencies
MUTE
to mute the output
POWER ON
power indicator
MASTER
to set the output volume
PHONES
connect your TRS jack headphones here
(HB3000BT front panel)
INPUT
connect your bass guitar here
CLIP LED
indicates an overloading input signal, lights up in red then
LIMITER
to limit the input signal in order to avoid input overload
VOLUME
adjust the input volume level
EQ
to decrease / increase the EQ frequency levels of DEEP,
BRIGHT, BASS, LOW MID, HIGH MID ,TREBLE
EQ IN
to activate / deactivate the EQ
MID SWEEP
to set a frequency from 250 Hz - 4 kHz to boost
SWEEP LEVEL
to decrease / increase the selected MID SWEEP frequency
MASTER
to set the output volume
PHONES
connect your TRS jack headphones here
MUTE LED
to mute line out and speaker output. LED lights up in
light red then
Summary of Contents for HB 115B MK III
Page 1: ...1...
Page 10: ...10...
Page 11: ...11...
Page 12: ...12 Contact Musikhaus Thomann Treppendorf 30 96138 Burgebrach Germany www thomann de...
