Harley Benton HB-10G, User Manual

Page: 15 / 24

1 [INPUT] | 1/4" jack socket to connect your instrument
2 [CHANNEL SELECT] | switch to toggle between clean and overdrive channel
3 [GAIN] | control to adjust the signals preamp gain
4 [BASS] | control to adjust the bass
5 [MIDDLE] | control to adjust the mids
6 [TREBLE] | control to adjust the treble
7 [VOLUME] | control to adjust the volume
8 Headphones output (3.5 mm mini phone socket). When you connect headphones, the internal speaker is automati‐
cally muted.
9 Aux input for connecting an MP3 or CD player (3.5 mm mini phone socket)
10 Standby indicator | If there is no signal at the instruments input [INPUT] for 30 minutes, the device will automatically
enter standby mode (LED green). As soon as the device receives a signal again at the instruments input [INPUT] , the
device automatically switches back to normal mode (LED red).
11 [POWER] | main switch. Turns the device on and off. The power cord is located in a recess on the back of the device.
Connections and controls
HB-10G
15
Guitar Combo