4
Control elements
Front panel
q
INPUT
connect your guitar here
w
BASS
EQ bass control
e
MIDDLE
EQ mids control
r
TREBLE
EQ treble control
t
VOLUME
to control the volume of the amp
y
PHONES
to connect headphones (not supplied)
u
STANDBY
Standby switch
i
POWER
to switch the amp on or off
Rear panel
o
AC
AC socket. Connect the power cord here.
a
SEND
Send connector of the effects loop. Here you
connect the input of an external effects unit.
s
RETURN
Return connector of the effects loop. Here you
connect the output of an external effects unit.
d
LINE OUT
Signal output with line level.
f
SPEAKER 4|8|16 OHM
Speaker output. Connect the built-in speaker to
the 8 ohm socket
or
connect an external speaker
box with 4, 8, or 16 ohm impedance to the
respective socket.
You must never operate this amplifier without a
proper speaker load! Otherwise you risk a serious
damage of the unit.