Harley Benton AC PRO 60, User Manual

Page: 18 / 32

21 [POWER] | main switch. Turns the device on and off.
22 IEC chassis plug with fuse holder
23 [STANDBY] | push-button to enable ( [ENABLE] ) or disable ( [DISABLE] ) the power saving mode
If there is no signal input in power saving mode at the [INPUT] jack for 15 minutes, the device will automatically enter
standby mode. As soon as the [INPUT] jack receives a signal again, the device switches back to normal mode.
24 LED [STANDBY] | standby mode. This LED lights up when the device – on activated power saving mode – switches to
standby mode and turns off when the device is switched back to normal operation.
25 LED [ACTIVE] | mode indicator. This LED lights up continuously green in normal operation and turns off when the
device – on activated power saving mode – switches to standby mode.
26 [FOOTSWITCH] | 1/4" jack socket to connect optionally available foot switches for switching effects
27 [PHONES] | 1/4" headphone jack socket. If you connect headphones, the internal speakers are disconnected.
To avoid annoying noises, turn the [MASTER] (19) control down before plugging headphones in or out.
28 [LINE OUT] | 1/4" jack socket (mono) which provides the preamp output signal You can use the preamp signal to feed
a separate power amp.
29 [DI OUT BALANCED] | XLR plug (balanced) which provides the preamp output signal. You can use the preamp signal
e.g. at the microphone input of a mixing console.
30 [RETURN] | 1/4" jack socket (mono) to connect the output of an effects device
31 [SEND] | 1/4" jack socket (mono) to connect the input of an effects device
32 [TUNER] | 1/4" jack socket (mono) to connect a tuner
Components and functions
18
AC PRO 60
Guitar Combo