13
Radial Winch
70.2 ST
Installation and Maintenance Manual - Mod.G
Assembly
Make sure that the holes and drainage channels in the base of the winch are not obstructed
Assemble the winch in the reverse order of the sequence in the section on disassembly.
To tighten bolts, use the torque indicated in the disassembly procedure.
The icon on the Stripper Arm Hou-
sing indicates the Stripper Arm final
position.
Change the Stripper Arm Housing
angle to modify the Stripper Arm final
position.
When positioning the stripper arm,
align the peeler with it.
If the jaws have been disassembled,
insert peeler between the two jaws,
taking care that the letters TOP on the
peeler are facing upwards.
OIL
To assemble the pawls
Correctly position the spring in its housing
as shown at left. Hold the spring closed
and slide the pawl into its housing. Once
in position, check that the pawls can be
easily opened and closed with a finger.
In case of doubt concerning the assembly procedure contact Harken
®
Tech Service:
