Printed in USA 4555 11/13
Big Boat End Controls
Replacement Parts: 3173, 3174
1
2
3
4
5
6
4
7
7
5
8
9
10
11
1
2
3
4
5
7
7
8
9
10
11
For additional safety, maintenance and warranty information see www.harken.com/
manuals or the Harken
®
catalog.
Warranty
Inspect
Carefully inspect track and mounting hardware for any signs of loosening, cracks or
damage. Inspect end stops to make sure they are secure and that there are no cracks or
damage. Arrange control tackle so cars do not hit end stops under load.
WARNING! Failure to inspect tracks and stops can result in track
pulling off deck suddenly and unexpectedly during high load.
Maintenance
Traveler Cars:
Clean by frequently flushing with fresh water. Periodically clean car by
squirting a detergent/water solution into center openings. Roll car back and forth to
distribute evenly then flush bearings with fresh water.
Do not use spray lubricants because ball bearings may skid not roll. Apply
a few drops of McLube
®
OneDrop
™
to ball contact surfaces of track.
Roll car back and forth through OneDrop
™
several times to distribute
onto bearings. Wipe remaining OneDrop
™
off track. OneDrop
™
is
preferred but you can also use one to two drops of a light machine oil. Too
much oil attracts dirt.
Track:
Clean with detergent and water.
Important! Exposure to some teak cleaners and other caustic solutions can result
in discoloration of part and is not covered under the Harken warranty.
Control Block Replacement Parts
No. Part No.
Description
No. Part No.
Description
1
Cheek assembly screws (3)
7
HBB172 Control Block Screws (Set)(2)
HFS797 3174 HL Double (3)
HFS1073 M10 X 1.5 x 25 mm (2)
HFS796 3173 HL Single (3)
HFS1074 M10 X 1.5 x 45 mm (2)
2
H-21641A Isolators (3)
8
2132 Shackle (1)
3
H-22471C Sideplate (Top) (1)
9
HFS786 Helicoils (M4 x .7 x 6 mm)(3)
4
HBB85 Rollers Bearings w/Cage (22)
10
4306 Harken Label (2)
5
H-21635B Sheave (1)
11
H-38067A Bumpers (2)
6
H-22473C Sideplate (Bottom) (1)
Printed in USA 4555 11/13
Big Boat End Controls
Replacement Parts: 3173, 3174
1
2
3
4
5
6
4
7
7
5
8
9
10
11
1
2
3
4
5
7
7
8
9
10
11
For additional safety, maintenance and warranty information see www.harken.com/
manuals or the Harken
®
catalog.
Warranty
Inspect
Carefully inspect track and mounting hardware for any signs of loosening, cracks or
damage. Inspect end stops to make sure they are secure and that there are no cracks or
damage. Arrange control tackle so cars do not hit end stops under load.
WARNING! Failure to inspect tracks and stops can result in track
pulling off deck suddenly and unexpectedly during high load.
Maintenance
Traveler Cars:
Clean by frequently flushing with fresh water. Periodically clean car by
squirting a detergent/water solution into center openings. Roll car back and forth to
distribute evenly then flush bearings with fresh water.
Do not use spray lubricants because ball bearings may skid not roll. Apply
a few drops of McLube
®
OneDrop
™
to ball contact surfaces of track.
Roll car back and forth through OneDrop
™
several times to distribute
onto bearings. Wipe remaining OneDrop
™
off track. OneDrop
™
is
preferred but you can also use one to two drops of a light machine oil. Too
much oil attracts dirt.
Track:
Clean with detergent and water.
Important! Exposure to some teak cleaners and other caustic solutions can result
in discoloration of part and is not covered under the Harken warranty.
Control Block Replacement Parts
No. Part No.
Description
No. Part No.
Description
1
Cheek assembly screws (3)
7
HBB172 Control Block Screws (Set)(2)
HFS797 3174 HL Double (3)
HFS1073 M10 X 1.5 x 25 mm (2)
HFS796 3173 HL Single (3)
HFS1074 M10 X 1.5 x 45 mm (2)
2
H-21641A Isolators (3)
8
2132 Shackle (1)
3
H-22471C Sideplate (Top) (1)
9
HFS786 Helicoils (M4 x .7 x 6 mm)(3)
4
HBB85 Rollers Bearings w/Cage (22)
10
4306 Harken Label (2)
5
H-21635B Sheave (1)
11
H-38067A Bumpers (2)
6
H-22473C Sideplate (Bottom) (1)
