![background image](http://html1.mh-extra.com/html/harken/inlh500/inlh500_user-manual_597656019.webp)
19
ENGLISH
04-04-16
Only for lifting loads:
- It is possible to fix the plate using ratchet strap,
connectors, anchor devices�
- It is the installer's responsibility to carry out all
structural tests needed to ensure that the mounting
surface can withstand the load�
Ensure the plate is securely attached to the mounting surface,
so that it can operate under load without significant movement�
The winch plate must be installed so that the line can be led
through the pigtail to the winch drum, with no more than 30°
of line deflection in any plane� The installation should use
pulley deflectors if necessary to ensure a fair lead to the
winch� The pigtail should not take any angle load�
Winch LokHead 500
The winch plate must be installed in a position to allow sufficient working space around unit, so not to impede operation of
handles�
Winch plate must be installed in a position to ensure visibility of the lift trajectory by operator at all times�
WARNING!
Failure to use correct number and type of mounting fasteners or failure to ensure correct mounting
surface strength can result in winch pulling off suddenly and unexpectedly during high loads,
possibly resulting in severe injury or death.
WARNING!
Incorrect installation of winch plate may cause severe injury or death. Consult equipment supplier
if in doubt about correct position of winch plate.
max. deflection
30°
max. deflection
30°
Fixing with M12 bolts
to the load
Fixing with Ratchet Strap
Only for lifitng loads
to the load
to the anchorage point
Summary of Contents for INLH500
Page 2: ......
Page 4: ...4 ENGLISH 04 04 16...
Page 12: ...12 ENGLISH 04 04 16 Winch LokHead 500 Tripod Use Configuration 742 573 143 889 254...
Page 31: ......