Right-angle reeving deadend on becket
For larger, printable diagrams, please see:
www.harken.com
.
Reeving Multi-Purchase Systems
Warranty
For additional safety, maintenance, and warranty information see www.harken.com or the Harken catalog.
Inspect Block and Shackle Before You Sail
Frequently inspect shackles and shackle posts for signs of corrosion, cracks, or elongation. When replacing
shackles, use the correct Harken parts to maintain proper strength. Replace line as necessary, taking into
consideration the maximum size recommendation.
WARNING! Failure to inspect and replace damaged metal parts and/or worn or frayed line can cause
block or system to break causing an accident, damage to your vessel, personal injury or death. See
www.harken.com for additional safety information.
M1004 06/19
5:1 Right-Angle Reeving
Dead-end on Becket
1
2
3
4
5
5
1
2
3
4
5
6
6:1 Right-Angle Reeving
Dead-end on cam
6:1 Right-Angle Reeving
Dead-end on becket
6
3
4
5
6
6
1
2
1
2
3
5
6
7
8
4
5:1
6:1
8:1
Maintenance
Flush block and attachments frequently with
detergent and fresh water. Clean bearings by
flushing areas shown while rotating sheave.
If block has cam cleat, flush balls in cam
cleats while rotating pawls.
Part No.
HFS889
Reverse Cam Cleat (Single Only)
1. Remove screws from cam.
2. Assemble as shown. Note: use plastic plate on cam as shown at
right.
3. Tighten screws.
Do not
overtighten screws or cams will
bind.