Loctite is a registered trademark of Henkel AG & Company KGaA.
6:1 Control Lines - Use 3169 Big Boat End Controls
1. Deadend one end of line to inside bar
on 3169 end control.
2. Pass other end of line to car,
upward between vertical sheave
and post.
3. Continue reeving line through lower
sheave at end control, around angled
car sheave, upward around upper
sheave on end control, around upper
car sheave, and out through cam
cleat.
4. Tie a stop knot in end of control line,
placed to prevent damage to car in an
uncontrolled jibe.
HARKEN
USA
PATENTED
3180 Windward Sheeting Adapter Kit for
3161, 3163, 3164, 3165, Big Boat CB (Captive Ball) Cars
Kit parts
Part No. Quantity
Description
610ASSY 1 Windward sheeting assembly
HFS1021 4 M6 X 1 X 12 screw
833
1 Blue Loctite
®
adhesive
610ASSY
HFS1021
833
Mounting 3180 Big Boat Adapter Kit
1. Remove screws holding swivel ears
or control blocks on top of car. Save
screws.
2. Place adapter kit on car so angled
sheaves face forward.
3. Put a few drops of blue Loctite on four
(4) screws and install in
corresponding holes in adapter kit.
Tighten screws firmly.
4. Reeve line as instructed.
HARKEN
USA
PATENTED
Install four (4) HFS1021
screws and tighten firmly
