Pre-Use inspections MUST be completed prior to each use, by a competent person.
Official periodic inspection must be performed at least semi-annually in accordance with all
appropriate local standards. The inspection must be performed by a qualified person other than
the intended user. If severe weather or conditions exist then inspections must be carried out more
frequently. All inspection results must be logged in the space provided above.
1. Make sure all labeling is affixed to the unit and all product/traceability information is
present/legible.
2. Inspect anchoring system for signs of damage or wear including corrosion and heat damage.
Move all rollers and beads to inspect cable length and terminations.
3. Visually inspect wire rope along full length and at formed eyes, moving rollers/beads. Checking
for signs of corrosion, impact/loading damage, cuts, frays, birdcaging and heat damage.
4. Inspect beads and rollers for signs of wear and damage. Please note damage to rollers and
beads will NOT affect the structural integrity of the product, but could affect operational
performance, or lead to the wire becoming exposed to a leading edge.
5. Record inspection results in the space provided above. It is recommended that following
successful inspection, the equipment is tagged wth ‘next inspection date’, using
non-destructive means.
*If any damage that could affect the strength or operation of the device, or unsafe
conditions are found, proper disposal is required. The anchorage connector must
be rendered unusable and then properly discarded.
INSPECTION AND MAINTENANCE LOG
MODEL NUMBER:
DA
SATRA Technology
Centre, Wyndham Way, Telford Way
Kettering, Northamptonshire, NN16 8 SD, United Kingdom
Tel: +44 (0) 1536 410000 / e-mail [email protected]
Satra Technology ( CE 0321) are the Notified Body responsible for CE Certification
DATE OF PURCHASE:
MODEL NUMBER:
DATE OF FIRST USE:
DATE OF MANUFACTURE:
Serial Number
Comments
Inspector Name
Date
**It is essential for safety that the user manual be translated to the language of
the country in which the product is to be sold.
