Hardy Process Solutions HI 2160RC PLUS, Operation And Installation Manual

Page: 126 / 220

Chapter 6 - Setup
6-35
NOTE: If the Allen Bradley RIO or the PROFIBUS option is installed in the HI 2160RC
PLUS
the printer will still work from the front panel. The Bi-directional function is disabled.
1 2 3 4 5 6 7 8
CONFIG
ON
FIG. 6-30 DISABLING THE PRINT FUNCTION
Printing Batch
Reports
• The controller will automatically print out a Batch Report if the
controller is in the Batch Mode of operation (See Chapter 8 for
detailed information).
• The Batch Report is triggered when the actual amount dispensed
reaches the batch amount requested.
• An example of a batch report:
BATCH REPORT
START: 08/22/04
10:32:12
STOP: 08/22/04
10:33:11
BATCH TIME: 00:00:59
BATCH AMOUNT
REQ: 5.000LB
ACT: 5.003LB
RATE DATA
SET POINT
5.000 L/M
AVERAGE 5.087 L/M
• To disable the Batch Report function, move Config. dip switch #3
to the ON position. (See Fig. 6-31)