Hardy Process Solutions HI 1769-WS, Operation And Installation Manual

Page: 19 / 82

Chapter 3 - Installation
3-1
CHAPTER 3 - INSTALLATION
A Brief Description of
Chapter 3 All information contained in Chapter 3 pertains to
unpacking, cabling, interconnecting, configuration
and installing the Weigh Scale Module. Alternatives
to any procedures contained or implied in this chapter
are not recommended. It is very important that the
user and service personnel be familiar with the proce-
dures contained in this chapter, before installing or
operating the Weigh Scale module. Hardy Process
Solutions appreciates your business. Should you
experience any problems installing this equipment,
contact Hardy Customer Support for assistance.
Unpacking Step 1. Before signing the packing slip, inspect
the packing for damage of any kind.
Step 2. Report any damage to the carrier company
immediately.
Step 3. Check to see that everything in the pack-
age matches the bill of lading. You should
normally have:
• HI 1769-WS or HI 1769-2WS
Weigh Scale Module
• Operation & Installation Manual
Step 4. Write down the Model and Serial number
of the module. Store this information in a
convenient location for reference when
contacting The Customer Support Depart-
ment for parts or service.
WARNING EXPLOSION HAZARD - DO NOT DISCON-
NECT WHILE CIRCUIT IS ALIVE UNLESS
AREA IS KNOWN TO BE NON-HAZARDOUS.
WARNING EXPLOSION HAZARD - SUBSTITUTION OF
COMPONENTS MAY IMPAIR SUITABILITY
FOR CLASS I, DIVISION 2.
WARNING RISK OF FIRE OR EXPLOSION. DO NOT
OPERATE SWITCH WHILE CIRCUIT IS LIVE.