Hardy HIBSD Bench Scale
Page - 11 -
6.2. Checkweighing
Use the checkweighing function to determine if the weight of an object is too heavy, too light or
is acceptable; indicated by HI, OK or LOW LEDs as well as an audible beep when
selected.
See section
7. PARAMETERS
for steps to enter the mode.
6.2.1. Set Limits
•
Press
and
keys at the same time, the display will show
set h.
•
Press
key to select either
set h
(set high) or
set l
(set low).
•
Press
key to confirm the selection, the display will show
00000
and the last digit will
blink.
•
Press
key to increment the value of the blinking digit.
•
Press the
and
keys to change the active digit.
•
Press
key to confirm the value,
•
Repeat the above to set the other limit (either high or low).
•
To escape from the settings press
key.
6.2.2. Set the audible alarm
•
Press
and
keys together, display will be show
set h.
•
Press
key to select display
beep.
