Charging point
Choose a device that is integrated/built-in your charging station
Options device type/manufacturer
eCB1 (internal)
an eCB1 PV is built in the charging
station → for PV-load control
KLEFR Energy Meter
KLEFR Energy Meter is installed as
measuring point in the charging station
Phoenix Contact Measuring point
Phoenix Contact measuring point is built
in the charging station
Serial
The system fills the serial number of the measuring point automatically after completion of
the set up.
EVCC
In this section you can choose between various Charge Controllers. The system usually
per-determines the correct EVCC. Should that not be the case, please choose
“PHOENIX CONTACT EVCC Modbus RTU”.
Configuration manual
eCB1
Smartmeter
Version: 1.2.1
19
