B L A C K
TO
W H I T E
W H I T E
TO
B L A C K
TO
B L U E
AC POWER
ANTENNA
PAN MOTOR
Make wiring connections from the house and the motor to the remote receiver as shown
above. Connect using wiring nuts(provided).
Once wiring step has been
completed, slide the wired
remote receiver in between
the mounting bracket and
the top of the downrod ball
for
Slide the canopy up to the mounting bracket.
The canopy has two mating slots(l)and two mating holes(2). Position both slots on canopy
directly under and in line w i t h t w o screws in the mounting bracket(3). Lift the canopy, allowing
the t w o screws
slide into the mating slots. Rotate the canopy clockwise until both screws
from the mounting
drop into the slot recesses. Tighten screws securely. Install t w o
screws and lock washers into the mating holes of the canopy and tighten to secure the canopy
to the mounting bracket.
Page 8
